Figure 3-62: Proxy & Registration - AudioCodes Mediant 3000 User Manual

SIP User's Manual
To configure the Proxy & Registration parameters:
1. Open the 'Proxy & Registration' page (Configuration tab > Protocol Configuration
menu > Proxies/IpGroups/Registration submenu > Proxy & Registration page
item).
2. Configure the parameters as required.
3. Click the Submit button to save your changes, or click the Register or Un-Register
buttons to save your changes and register / unregister to a Proxy / Registrar.
4. To save the changes to flash memory, refer to ''Saving Configuration'' on page 190.
Click the Proxy Set Table
groups of proxy addresses. Alternatively, you can open this page from the Proxy Sets
Table page item (refer to ''Configuring the Proxy Sets Table'' on page
of this page).
Version 5.8
Figure 3-62: Proxy & Registration Page
button to open the 'Proxy Sets Table' page to configure
115
3. Web-Based Management
116 for a description
September 2009