Figure 3-63: Proxy Sets Table - AudioCodes Mediant 3000 User Manual

3.3.7.4.2 Configuring the Proxy Sets Table
The 'Proxy Sets Table' page allows you to define Proxy Sets. A Proxy Set is a group of
Proxy servers defined by IP address or fully qualified domain name (FQDN). You can
define up to six Proxy Sets, each having a unique ID number and each containing up to five
Proxy server addresses. For each Proxy server address, you can define the transport type
(i.e., UDP, TCP, or TLS). In addition, Proxy load balancing and redundancy mechanisms
can be applied per Proxy Set (if a Proxy Set contains more than one Proxy address).
Proxy Sets can later be assigned to IP Groups of type SERVER only (refer to ''Configuring
the IP Groups'' on page 120). When the device sends an INVITE message to an IP Group,
it is sent to the IP address/domain name defined for the Proxy Set that is associated with
the specific IP Group. In other words, the Proxy Set represents the destination of the call.
Typically, for IP-to-IP call routing, at least two Proxy Sets are defined for call destination –
one for each leg (IP Group) of the call (i.e., both directions). For example, one Proxy Set for
the Internet Telephony Service provider (ITSP) interfacing with one 'leg' of the device and
another Proxy Set for the second SIP entity (e.g., ITSP) interfacing with the other 'leg' of the
device.
Notes:
To add Proxy servers and configure Proxy parameters:
1. Open the 'Proxy Sets Table' page (Configuration tab > Protocol Configuration
menu > Proxies/IpGroups/Registration submenu > Proxy Sets Table page item).
SIP User's Manual
•
You can also configure the Proxy Sets table using two complementary ini
file table parameters (refer to ''SIP Configuration Parameters'' on page
301):
- ProxyIP: used for creating a Proxy Set ID defined with IP addresses.
- ProxySet: used for defining various attributes per Proxy Set ID.
•
Proxy Sets can be assigned only to SERVER-type IP Groups.
Figure 3-63: Proxy Sets Table Page
116
Mediant 3000
Document #: LTRT-89707