Proxies, Ip Groups, And Registration - AudioCodes Mediant 3000 User Manual

3.3.7.3.2 Configuring DTMF and Dialing Parameters
The 'DTMF & Dialing' page is used to configure parameters associated with dual-tone multi-
frequency (DTMF) and dialing. For a description of the parameters appearing on this page,
refer to ''Configuration Parameters Reference'' on page 265.
To configure the DTMF and dialing parameters:
1. Open the 'DTMF & Dialing' page (Configuration tab > Protocol Configuration menu
> Protocol Definition submenu > DTMF & Dialing page item).
2. Configure the parameters as required.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, refer to ''Saving Configuration'' on page 190.
3.3.7.4

Proxies, IP Groups, and Registration

The Proxies/IpGroups/Registration submenu allows you to configure SIP proxy servers,
registration parameters, and IP Groups. This submenu includes the following items:
Proxy & Registration (refer to ''Configuring Proxy and Registration Parameters'' on
page 114)
Proxy Sets Table (refer to ''Configuring the Proxy Sets Table'' on page 116)
IP Group Table (refer to ''Configuring the IP Groups'' on page 120)
Account Table (refer to ''Configuring the Account Table'' on page 124)
3.3.7.4.1 Configuring Proxy and Registration Parameters
The 'Proxy & Registration' page allows you to configure parameters that are associated with
Proxy and Registration. For a description of the parameters appearing on this page, refer to
''Configuration Parameters Reference'' on page 265.
Note:
SIP User's Manual
Figure 3-61: DTMF & Dialing Page
To view whether the device or its endpoints have registered to a SIP
Registrar/Proxy server, refer to Registration Status.
114
Mediant 3000
Document #: LTRT-89707