Figure 3-86: Trunk Group Settings - AudioCodes Mediant 3000 User Manual

SIP User's Manual
To configure the Trunk Group Settings table:
1. Open the 'Trunk Group Settings' page (Configuration tab > Protocol Configuration
menu > Trunk Group submenu > Trunk Group Settings page item).
2. From the 'Routing Index' drop-down list, select the range of entries that you want to
edit (up to 24 entries can be configured).
3. Configure the Trunk Group according to the table below.
4. Click the Submit button to save your changes.
5. To save the changes to flash memory, refer to ''Saving Configuration'' on page 190.
An example is shown below of a REGISTER message for registering endpoint "101" using
registration Per Endpoint mode. The "SipGroupName" in the request URI is taken from the
IP Group table.
REGISTER sip:SipGroupName SIP/2.0
Via: SIP/2.0/UDP 10.33.37.78;branch=z9hG4bKac862428454
From: <sip:101@GatewayName>;tag=1c862422082
To: <sip:101@GatewayName>
Call-ID: 9907977062512000232825@10.33.37.78
CSeq: 3 REGISTER
Contact: <sip:101@10.33.37.78>;expires=3600
Expires: 3600
User-Agent: Audiocodes-Sip-Gateway/v.5.80A.008.002
Content-Length: 0
Version 5.8
Figure 3-86: Trunk Group Settings Page
171
3. Web-Based Management
September 2009