Ipv6 Configuration Using The Ems; Configuring Ipv6 - AudioCodes Mediant 3000 User Manual

5.10

IPv6 Configuration using the EMS

This section describes how to configure IPv6, which includes the following:
IPv6 Configuration
Configuring IPv4 and IPv6 for SIP

5.10.1 Configuring IPv6

The procedure below describes how to configure IPv6.
To configure IPv6 using EMS:
1. At the top of the screen, select General Configuration > Network; the IP Settings 1
screen appears.
2. Click the
Note:
3. Click Yes to create a new IPv4 row, and then configure the row with the following
settings:
•
'Application Types': select 'ALL'.
SIP User's Manual
Figure 5-23: IP Settings 1 Screen
button to create a new row; a confirmation message box appears.
Two new rows need to be added - one for IPv4 and one for IPv6. At this point,
create the row for IPv4.
252
Mediant 3000
Document #: LTRT-89707