Accessing Pages; Viewing Parameters - AudioCodes Mediant 3000 User Manual

3.1.6.1

Accessing Pages

The configuration pages are accessed by clicking the required page item in the Navigation
tree.
To open a
1. On the Navigation bar, click the required tab:
•
Configuration (refer to ''Configuration Tab'' on page 62)
•
Management (refer to ''Management Tab'' on page 180)
•
Status & Diagnostics (refer to ''Status & Diagnostics Tab'' on page 204)
The menus of the selected tab appears in the Navigation tree.
2. In the Navigation tree, drill-down to the required page item; the page opens in the
Work pane.
You can also access previously opened pages, by clicking your Web browser's Back button
until you have reached the required page. This is useful if you want to view pages in which
you have performed configurations in the current Web session.
Notes:
3.1.6.2

Viewing Parameters

For convenience, some pages allow you to view a reduced or expanded display of
parameters. A reduced display allows you to easily identify required parameters, enabling
you to quickly configure your device.
The Web interface provides you with two methods for handling the display of page
parameters:
Display of "basic" and "advanced" parameters (refer to ''Displaying Basic and
Advanced Parameters'' on page 37)
Display of parameter groups (refer to ''Showing / Hiding Parameter Groups'' on page
38)
Note:
SIP User's Manual
configuration page
•
You can also access certain pages from the Device Actions button
located on the toolbar (refer to ''Toolbar'' on page 31).
•
To view all the menus in the Navigation tree, ensure that the Navigation
tree is in 'Full' view (refer to ''Displaying Navigation Tree in Basic and Full
View'' on page 34).
•
To get Online Help for the currently opened page, refer to ''Getting Help''
on page 55.
•
Certain pages may not be accessible if your Web user account's access
level is low (refer to ''Configuring the Web User Accounts'' on page 90).
Certain pages may only be read-only if your Web user account's access level
is low (refer to ''Configuring the Web User Accounts'' on page 90). If a page is
read-only, 'Read-Only Mode' is displayed at the bottom of the page.
in the Work pane:
36
Mediant 3000
Document #: LTRT-89707