Figure 3-50: Web & Telnet Access List Page - Add New Entry; Figure 3-51: Web & Telnet Access List Table - AudioCodes Mediant 3000 User Manual

To add authorized IP addresses for Web and Telnet interfaces access:
1. Open the 'Web & Telnet Access List' page (Configuration tab > Security Settings
menu > Web & Telnet Access List page item).
Figure 3-50: Web & Telnet Access List Page - Add New Entry
2. To add an authorized IP address, in the 'Add a New Authorized IP Address' field, enter
the required IP address, and then click Add New Address; the IP address you
entered is added as a new entry to the 'Web & Telnet Access List' table.
3. To delete authorized IP addresses, select the Delete Row check boxes corresponding
to the IP addresses that you want to delete, and then click Delete Selected
Addresses; the IP addresses are removed from the table and these IP addresses can
no longer access the Web and Telnet interfaces.
4. To save the changes to flash memory, refer to ''Saving Configuration'' on page 190.
Notes:
SIP User's Manual
Figure 3-51: Web & Telnet Access List Table
•
The first authorized IP address in the list must be your PC's (terminal) IP
address; otherwise, access from your PC is denied.
•
Only delete your PC's IP address last from the 'Web & Telnet Access List'
page. If it's deleted before the last, access from your PC is denied after
it's deleted.
94
Mediant 3000
Document #: LTRT-89707