Changing The Balancing Spring - Asko 600 Series Service Manual

SERVICE

Changing the balancing spring

1. Remove the top cover by first removing the 3
screws at the rear edge and then lifting the cover
off.
2. Use pliers to unhook the balancing spring from
the holder.
3. Front spring: Unhook the spring from the
front rail.
Rear spring: Unhook the spring from the cross
member.
4. Install a new spring by first hooking it to the
member and then to the holder.
5. Fit the top cover.
IMPORTANT
Don't forget the 2 star washers for the outermost
screws of the top cover.
60
3
2