Changing The Lid Catch - Asko 600 Series Service Manual

SERVICE

Changing the lid catch

1. Open the washing lid either by pressing the
lid opening button or with the emergency
opening handle behind the drain pump co-
ver.
2. Remove the 2 screws securing the lid and take
it off.
3. Remove the four screws around the glass.
4. Take off the frame by inserting a screwdriver
into the opening at the side and turning it.
5. Pull the catch straight out.
6. Push in the new catch.
7. Install the frame, starting at the rear edge, and
press it in.
8. Install the washing lid.
44
2
3
5
4