Changing The Plastic Lockings On The Front Panel; Changing The Front Panel Securing Clips - Asko 600 Series Service Manual

SERVICE
Changing the plastic lockings on the front
panel
1. Remove the front panel in accordance with
the section "Front panel - Removing...".
2. Remove the control unit by squeezing the lat-
ches and pulling it out.
3. Push the new control unit in until it latches
into place.
4. Refit the front panel in accordance with the
section "Front panel - Installing...".

Changing the front panel securing clips

1. Remove the front panel in accordance with
the section "Front panel - Removing...".
2. Remove the securing clips by by squeezing the
latches and pulling it out.
3. Install new clips by inserting them into the
holes in the front panel and pushing them
down.
4. Install the front panel in accordance with the
section "Front panel - Installing...".
36