Changing The Radio Interference Filter - Asko 600 Series Service Manual

Changing the radio interference filter

1. Remove the top cover by first removing the 3
screws at the rear edge and then lifting the cover
off.
2. Disconnect the wiring from the radio interfe-
rence filter.
3. Unscrew the nut securing the filter and take it
out.
4. Install the new radio interference filter.
5. Install the wiring in accordance with the la-
bels on the wires.
IMPORTANT
Connect the wires to the correct flat pin connec-
tors.
6. Fit the top cover.
IMPORTANT
Don't forget the 2 star washers for the outermost
screws.
SERVICE
2
F3 F4
F2 F1
67