Changing The Indication Lamp/Symbol Lens; Changing The Main Power Button - Asko 600 Series Service Manual

NOTE
Press with a screwdriver behind the beam when
the middle of the panel is being pressed into pla-
ce.
7. W600 and W620: Push the knobs back on.
8. Install the detergent compartment and secure
the 3 screws.
9. Put in the detergent insert.
10. Fit the top cover.
IMPORTANT
Don't forget the 2 star washers for the outermost
screws.

Changing the indication lamp/symbol lens

1. Remove the panel in accordance with the sec-
tion "Panel - removing...".
2. Change the indication lamp/symbol lens.
3. Install the panel in accordance with the sec-
tion "Panel - installing...".

Changing the main power button

1. Remove the panel in accordance with the sec-
tion "Panel - removing...".
2. Press in the latches with a screwdriver and pull
out the button.
3. Install the new button.
IMPORTANT
Ensure that the spring is located in the button
before installing.
4. Install the panel in accordance with the sec-
tion "Panel - installing...".
2
2
SERVICE
27