Common Questions And Problems; The Lid Will Not Open; The Machine Will Not Take In Water; Grey Laundry - Asko 600 Series Service Manual

PROBLEMS

COMMON QUESTIONS AND PROBLEMS

The lid will not open

Check that the main power switch is on.
The machine will not start
If the lid is closed, check the house fuses.

The machine will not take in water

1. Is the stop cock open?
2. Check that the inlet hose filter is not bloc-
ked.
Foam in the last rinse, water remains in the
machine
1. Check that the drain hose is not blocked or
sharply kinked.
2. Check to see if the drain pump is blocked.
Water leaks
Check the hoses and seal at least once a year and
change them if they show signs of wear.
Vibration during spin drying
1. Check that the transport supports have been
removed.
2. The machine must stand firmly on the floor.
Adjust the machine feet and tighten the lock
nuts.
Too much foam
1. Use only low-foam detergent.
2. Too much detergent, use only the dose stated
on the detergent packet.
The machine stops in the middle of the
program
It is normal for the machine to "pause" during
the program, especially between the different cy-
cles, and during the Wool wash program.
Yellow laundry
Can be caused by body fluids that have not been
entirely washed out.
1. Use the highest possible temperature for this
load of washing. Try putting in more deter-
gent than usual.
Can also be caused by iron or magnesium in the
water.
1. Install a filter.

Grey laundry

1. If the washing is very dirty, has oil stains or
the water is very hard, put in more detergent
than usual.
2. Choose the correct temperature for each wash-
ing load.
3. Sort the washing according to its colour. Ne-
ver mix light and dark materials in the same
load.
4. Use detergent that contains whitener for white
textiles, and detergent without whitener for
coloureds.
Fluff, stains on the laundry
1. Detergent that does not contain phosphates
can, when combined with the minerals in hard
water, build up a substance that can cause
"fluff". If possible, install a water purifier.
2. Stains on laundry can occur if it comes into
contact with undiluted rinsing agent. Put the
rinsing agent dose into the compartment for
rinsing agents. Never add rinsing agent directly
to the washing.
3. Burls normally occur on cotton/polyester
material. For the best results, turn the garment
inside out and use the delicate washing pro-
gram.
Creased laundry
1. Follow the washing advice.
2. Do not overload the machine.
3. Don not let the washing stay for a long time
in the machine after the program has finis-
hed.
4. Certain materials such as linen and cotton
crease naturally, regardless of how they are
washed.
Torn or damaged material
Material can be damaged by sharp objects, such
as metal parts on clothes or objects in pockets.
1. Empty all pockets and turn the garment insi-
de out.
2. Close hooks and zips.
3. Turn inside out for washing.
PROBLEMS
13