Detergent Insert; Changing The Detergent Insert Handle; Changing The Child Safety Catch - Asko 600 Series Service Manual

DETERGENT INSERT

Changing the detergent insert handle

1. Pull forward and lift out the detergent insert.
NOTE
The detergent insert may have a child safety catch
fitted. To pull out the detergent insert when the
safety catch is set, you have to move the latch to
the left at the same time as you pull out the tray.
2. Remove the 2 snap fasteners from the under-
side of the insert with the aid of a screwdriver.
3. Pull the handle away from the detergent in-
sert.
4. Insert the new handle into the groove in the
insert. Press it in until it snaps into place.
5. Put the detergent insert back in.

Changing the child safety catch

1. Pull forward and lift out the detergent insert.
NOTE
The detergent insert may have a child safety catch
fitted. To pull out the detergent when the safety
catch is set, you have to move the latch to the left
at the same time as you pull out the tray.
2. Press in the child safety catch latches and re-
move it.
IMPORTANT
Take care not to break off the latches.
3. Fit the new catch by pressing it into the hole
until it snaps into place.
IMPORTANT
Do not forget to install the spring together with
the catch.
4. Put the detergent insert back in.
1
2
1
2
SERVICE
25