Front Loading Door; Removing The Front Loading Door; Installing The Front Loading Door; Changing The Front Loading Door Handle - Asko 600 Series Service Manual

SERVICE
FRONT LOADING DOOR (ONLY MODELS WITH

FRONT LOADING DOOR)

Removing the front loading door

1. Remove the bottom cover in accordance with
the section "Bottom cover - Removing..."
2. Unscrew the 2 nuts in the door hinges.
3. Release the spring that holds the door.
4. Hold the door and remove the 2 screws.
IMPORTANT
Keep the 2 nylon washers that are located bet-
ween the fixture and the hinge.
5. Remove the door by pulling it outwards and
upwards.

Installing the front loading door

6. Install the door.
7. Install the nylon washers and insert the screws.
8. Put the spring back.
9. Tighten the nuts.
10. Install the bottom cover in accordance with
the section "Bottom cover - Installing...".

Changing the front loading door handle

1. Unscrew the 4 screws that secure the handle
to the front loading door.
2. Secure the new handle with the 4 screws.
38
4
3
1
4
2