Bottom Cover; Removing The Bottom Cover; Installing The Bottom Cover; Changing The Drain Pump Cover - Asko 600 Series Service Manual

B O T T O M C O V E R ( M O D E L S W I T H F R O N T
LOADING DOOR)

Removing the bottom cover

1. Open the drain pump cover. Use the parti-
tion from the detergent compartment or a
screwdriver.
2. Disconnect the drain hose.
IMPORTANT
Take care not to break off the drain plug.
NOTE
There may be water left in the machine, that will
run out through the drain hose.
3. Unscrew the emergency opening handle.
4. Remove the 2 screws at the bottom.
5. Remove the cover, starting at the lower edge.

Installing the bottom cover

6. Align both guides with the top of the cover.
7. Lift the cover into place and press the lower
edge in.
8. Secure the cover with the 2 screws at the bot-
tom.
IMPORTANT
Don't forget the 2 star washers for the screws at
the lower edge.
9. Screw back the emergency opening handle and
reconnect the drain hose. Close the cover.

Changing the drain pump cover

1. Open the drain pump cover and disconnect
the drain hose.
IMPORTANT
Take care not to break off the drain plug.
2. Insert a screwdriver into the fixing on the up-
per or lower edge and carefully lever off the
cover.
3. Offer up the new cover and carefully press it
until it clicks into place.
4
2
2
SERVICE
3
1
37