Children's Safety; Child Safety Catch On Detergent Compart; Menu Buttons - Asko W640 Use And Care Manual

Asko w640: user guide
Hide thumbs Also See for W640:
Table of Contents

Advertisement

3 CHILDREN'S SAFETY

CHILD-SAFE WASHING
Always close the washer door and start the pro-
gram immediately after filling the detergent.
Do not allow children to play with the wash-
ing machine.
PROTECT CHILDREN
Keep detergents and conditioner out of the reach
of children.

CHILD SAFETY CATCH ON DETERGENT COMPART -

MENT
On the right in the handle of the detergent
compartment there is a disengageable safety
catch to prevent children from opening the
compartment.
Engaging the child safety catch
To engage the child safety catch, pull the deter-
gent compartment out a little so that you can
reach the catch. Pull the catch towards you and
then release it.
Child safety catch engaged
To be able to open the compartment when the
child safety catch is engaged you must push the
catch to the left while pulling out the compart-
ment.
Disengaging the child safety catch
To disengage the child safety catch, push the
catch to the left and then in.
6
CHILD LOCK ON
Start/Stop
By locking the
and
Start/Stop
prevent that for example a child starts the mach-
ine or changes the settings by mistake.
Child lock On/Off
Turn the main power switch,
turn it on again.
Press the
button five times, then press
Enter
the
button five times. These ten times must
P3
be completed within fifteen seconds.
Within three seconds after the last press on
the
button, use the
P3
choose Child lock ON (the figure 3 will appear
at the bottom right in the display) or OFF (the
figure 0 will appear at the bottom right in the
display).
To start a program with locked
Press the
button for three seconds and
Start/Stop
the machine will start.
To change program settings with Child locked
button.
Menu
Press the
button for three seconds, after
Menu
that the
button works normally again. If
Menu
you do not press any button within two minu-
tes, the
button will be locked again.
Menu
NOTE
If you want to change the settings after you
have started a program, you always have to press
the
button for three seconds.
Menu
AND
BUTTONS
Menu
buttons, you can
Menu
, off and then
buttons to
button.
Start/Stop

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents