Dear Customer, Thank you for choosing this quality product from ASKO. We hope it will meet your expectations and fulfi l your needs for many years to come. Scandinavian design combines clean lines, everyday functionality and high quality. These are key characteristics of all our products and the reason they are greatly appreciated throughout the world.
Contents Before using your machine for the Advice and tips before washing fi rst time Washing Transport protection Sort your laundry. Packing material Turn on the main power switch Washer door Open the washer door and load Language selection the washing Checking water hardness Add detergent and fabric softener, as required...
Page 3
Contents Troubleshooting The washer door will not open The machine will not start After power failure Wet washing still in the machine Error messages Technical information Information for test institute Technical data Transport protection Installation Positioning the washing machine Adjusting the feet Connection to water supply Drainage connection Electrical installation...
Before using your machine for the fi rst time Transport protection Checking water hardness Remove any transport protection devices before The quantity of detergent needed depends, installing the machine. See the "Transport amongst other things, on how hard the water protection"...
• Installation should be carried out by qualifi ed to pump water out and shuts off the water ASKO technicians. intake. If the water level has not dropped within • The machine should only be used for 60 seconds, the program is terminated.
Child safety Keep an eye on children! Activate child safety catch (for detergent compartment) • Always close the door and start the programme immediately once you have On the inside of the detergent compartment is a added detergent. child safety catch. •...
Description of the washing machine 1. Main power switch 2. Dispenser 3. Programme panel 4. Serial number plate (on inside of washer door) 5. Drainage pump cover 6. Drainage pump (behind cover) 7. Washer door...
Dispenser 1. Pre-wash 2. Main wash with liquid detergent. Use the separator (A). 3. Main wash with powder detergent. Do not use the separator. 4. Fabric softener 5. Release button 6. Child safety catch...
Advice and tips before washing Here are some tips that may help you before washing. Sorting your laundry Sort items according to: • how soiled they are • colour • material Clothing 1. Do up zips and close Velcro straps so that they don’t harm fabrics.
Advice and tips before washing Unbleached linen High water level Unbleached linen fabrics should be washed at If you want more water for the main wash and 60 °C, using detergent containing no bleach rinses, you can use the High water level option. or optical whiteners.
Advice and tips before washing Dyeing fabrics If you want to dye fabrics in the machine, select the Everyday wash program with the Super Rinse option. Select temperature according to the dye manufacturer’s recommendations. Choose a low spin speed if the fabric to be dyed is a blended material such as polyester/cotton.
Washing Sort your laundry. Wash ball or net See the "Advice and tips before washing" If you use a wash ball or net, place it directly chapter. in the drum and select a program without pre- Place underwired bras in a laundry net. wash.
Washing Program selection 4. Normal You select a programme by turning Program for normal to heavily soiled laundry, the programme selector. The selected whites and colours. You can select the programme is shown in the display. Now use temperature freely, so follow the washing the option buttons to select any options.
Page 14
Washing 8. Synthetics Program for delicate garments made of synthetic fi bre, mixed fi bre, rayon and easy care cotton. The maximum temperature is 60°C, but follow the washing instructions for each garment. Many synthetics will come clean at 40°C. Garments worn next to the skin ought to be washed at 60°C.
Page 15
Washing Program chart Water consumption (approx. liter) 1)+2) Cold Program 1. Auto 2. Time program 1800 2:45 3. Heavy 1800 2:40 1800 1,13 3:55 4. Normal 1800 0,47 3:40 5. Everyday wash 1800 1:40 6. Quick 1800 0:45 7. Easy Care 1200 1:40 8.
Washing Selecting options • , means that the program does not include You can select options to adjust the a spin cycle and ends by draining. wash programme to suit your own • No D, No drain means that the program specifi...
Page 17
Washing Anti crease NOTE! Anti crease means that the drum will rotate for Make sure the detergent compartment is three seconds per minute for two hours once completely dry before you add detergent, the wash programme has fi nished. This function otherwise there is a risk that the detergent will prevents the clothes from lying in the same clump before the machine starts.
Washing Close the washer door and To add or remove washing after the press the Start/Stop button program starts If you want to add or remove items after the program has started, you can stop the program by pressing and holding the Door opening button (key symbol) for three seconds.
Settings You can change the following 2. Press the Door opening button once to save settings: the setting. • Child-safe Language • Door opening • Language 1. Turn the program selector to choose from: • Temperature US English, English, Svenska, Dansk, Norsk, •...
Care and cleaning Cleaning the trap and the drainage pump The washing machine has a trap where smaller objects such as coins and hairpins can collect. To clean the trap and the drainage pump, do as follows: 1. Make sure the machine is empty of water and switched off...
Care and cleaning Rinse holes under the agitator 5. Place the agitator in the mounting hole with If you suspect that objects such as nails or the F-mark towards you. Ensure that all the paper clips may have fallen into the wash agitator fasteners are in their holes in the drum, you should check the space under the drum.
Troubleshooting The washer door will not open D Push the tool upwards to open the washer 1. Check that the main power switch is on. door. 2. Is there power? Check your home’s fuses (circuit breakers). The washer door cannot be opened with the door opening button (with the key symbol) if power is off...
Troubleshooting Error messages Water inlet fault Check: If an error occurs during the programme a message is shown on the display. To exit • that the tap on the water pipe is open. the message after taking measures, turn the •...
Technical information Technical information Information for test institute Energy labelling Australian standard: AS/NZS 2040.1:1998 Washing program: Normal, 40 °C, 7 kg cotton Connection: Cold water 20 °C Test method for noise measurement: IEC-60704-2-4 Power requirement when machine turned off < 0,3 W Power requirement for Delayed Start <...
Page 25
Technical information Loading procedure for standard test: When loading the machine for testing according to AS/NZS 2040:2005 it shall be loaded according to the table below. Garments are placed on top of each other in layers and the soil swatches should be placed inside the wash drum in the direction shown in the table, seen from above.
Technical information Technical data Height: 850 mm Width: 595 mm Depth: 585 mm Weight: 73 kg Cylinder volume: 60 l Max. washing capacity: 7 kg Spin speed (rpm): 400 -1800 Rated power: See type plate. Heater output: See type plate. Water pressure: 0,1-1 MPa 1-10 kp/cm...
Transport protection Remove the three transport bolts and the plastic plugs for locking the machine for transport before using the machine. NOTE! If the machine is to be transported, the bolts and plastic plugs for locking the machine during transport must be installed to prevent damage to the machine through shaking.
Installation Positioning the washing machine The washing machine can be installed as a built-in or freestanding unit. Place the machine on a fi rm surface with easy access to the plug. A. Built-in The washing machine can be installed under a counter top with a working height of 850-900 mm.
Installation Drainage connection Electrical installation The machine is supplied with a drainage hose Connect the machine by plugging it into an attached, which must be connected to a drain. earthed wall socket. The electrical wall socket See the examples below. The height must be must be placed outside of the installation area 600-900 mm above fl...
Service Before contacting the service division Model Number Before you contact the service division, make sure that you know the model number (located on the front panel), and serial number. The model designation can be found on the panel. The type designation and serial number Serial Number can be found on the type plate on the inside of the washer door.
ASHER DOOR AND PRESS THE CLOSE THE W START BU TTON The time remaining is shown in hours and minutes. We reserve the right to make changes. www.asko.com WM70.2 W6884W ECO AU/NZ en (04-16)
Need help?
Do you have a question about the w6884w eco and is the answer not in the manual?
Questions and answers