Paper Detailed Settings Dialog Box - Canon imagePROGRAF iPF830 User Manual

Paper Detailed Settings Dialog Box

Paper Detailed Settings Dialog Box

Paper Detailed Settings Dialog Box
The Paper Detailed Settings dialog box offers the following settings. For details on settings items, refer to the
printer driver help.
•
To display the Paper Detailed Settings dialog box, on the Main pane, click Set by Media Type. (See "Main
Pane .")
Note
A
Media Type
The paper selected with Media Type of the Main panel is displayed.
For information on the types of paper the printer supports, refer to the Paper Reference Guide. (See "Displaying
the Paper Reference Guide.")
B
Drying Time
Specify the time that the printer waits for ink to dry, as needed. The Between Pages setting is only valid for rolls.
• C
Between Pages
You can set the time to wait after printing 1 document page until ejecting the paper. Since waiting time is re-
quired for ink to dry before a roll is cut, you can deliver paper in the Output Stacker with the ink dried even if
Cutting Mode is set to Automatic.
Setting Item
Printer Default
None
30 sec. / 1 min. / 3 min. / 5 min. /
10 min. / 30 min. / 60 min.
• D
Between Scans
You can set the time to wait after printing 1 line on a page until printing the next line. Set this to avoid bleeding
or color unevenness such as when bleeding occurs on a page or when color unevenness occurs during bor-
derless printing.
Setting Item
264
Printer Default
None
1 sec. / 3 sec. / 5 sec. / 7 sec. / 9
sec.
P.260
➔
P.323
➔
The setting of the control panel of the printer is applied.
Paper is ejected immediately after printing completes.
Paper is ejected when the set time elapses after printing completes.
The setting of the control panel of the printer is applied.
The next line is printed immediately after a line is printed.
The next line is printed when the set time elapses after a line is printed.
* Increase the time according to the occurrence condition of bleeding or unevenness.
Details
Details
iPF830
User's Guide