Canon imagePROGRAF iPF830 User Manual page 455

iPF830
Adjust Printer
Take-up Reel
Printer Info
*1:Displayed when the Media Take-up Unit is mounted.
HEAD LOT NUMBER/ DATE OF INSTALLATION
HEAD INFxx
PARTS STATUS
User's Guide
Date Format
Language
Time Zone
Length Unit
Detect Mismatch
Paper Size Basis
Keep Paper Size
TrimEdge Reload
Rep.P.head Print
Nozzle Check
CarriageScanWdth
Use USB
Use Ethernet
Use RemoteUI
Output Method
Print After Recv
Common Box Set.
Show Job Log
Head Posi. Adj.
( *1 )
Use Take-up Reel
Skip Take-Up Err
Ink Info
System Info
Error Log
The printhead lot number and date and time when the Print-
head was installed.
Utilization status of replacement parts that require servicing.
Printer system settings, as well
as settings regarding warnings
and errors.
Paper-related settings.
Sht Selection 1
Sht Selection 2
Settings after a test pattern was
printed following head replace-
ment.
Nozzle-check settings.
Frequency
Warning
Carriage scan width setting.
Use USB settings values.
Use Ethernet settings values.
Settings used by RemoteUI.
Print job settings.
Print job settings.
Adjustment settings.
A counter for maintenance pur-
poses.
Adjust Log
Head position adjustment values
for previous jobs.
Settings regarding the Media
Take-up Unit.
Ink information, RAM usage, and
a record of errors.
Ink-related information.
MC Maintenance Cartridge capacity
(%)
(The ink color is dis- Ink levels.
played here.) The remaining ink is displayed in
a five-level scale.
Indicates the total amount of
RAM.
RAM
The past five error codes.
Status Print
455