iPF830
The Media Take-up Sensor cord is not connected to the Right Media
Take-up Unit correctly.
The size of clear film cannot be detected
The size of clear film cannot be detected
Cause
The Platen is soiled with ink or other substances.
User's Guide
Cause
Open the Top Cover and clean the entire Platen.
(See "Cleaning Inside the Top Cover.")
The size of clear film cannot be detected
Corrective Action
Remove the foreign object from the Media Take-up Sensor
path. Arrange the Basket Cloth and Basket Rod so they do
not interfere with the Media Take-up Sensor.
Reconnect the Media Take-up Sensor cord as follows.
1.
Turn the printer off.
2.
Disconnect the Media Take-up Sensor cord from the
Right Media Take-up Unit and reconnect it firmly, all the
way in.
3.
Turn the printer on.
(See "Loading the Rewind Spool on the Media Take-up
Unit.")
P.367
➔
If the Media Take-up Unit continues rotating, contact your
Canon dealer for assistance.
Corrective Action
P.591
➔
615