Setting Control Panel Access Lock - Canon imagePROGRAF iPF830 User Manual

Setting Control panel access lock

TCP/IPv6
TCP/IPv6
Network Interface
Setting Control panel access lock
Setting Control panel access lock
This section describes the procedure for setting and releasing the control panel access lock.
458
•
The setting can only be changed in administrator mode.
Note
Use a stateless address
Use a link-local Address
Use a manual address
Use the same host name and do-
main name as IPv4
Perform dynamic updating of stateful addresses
Dynamically update the stateless address
Dynamically update the manual address
Frame Type
Use Zeroconf Function
MulticastDNS ServiceName
LPD Printing
IPP Printing
IPP Printer URI
RAW Printing
Raw Mode Bi-direction
Physical Interface
Transmission Rate
MAC Address
Auto Detect
Communication
Ethernet Type
Spanning Tree
Use the Jumbo Frame Function
Prefix Length 3
Stateless Address 4
Prefix Length 4
Stateless Address 5
Prefix Length 5
Stateless Address 6
Prefix Length 6
Link-Local Address
Prefix Length
IP Address
Prefix Length
Default Router Address
Prefix Length
Primary DNS Server Address
Secondary DNS Server Address
DNS Host Name
DNS Domain Name
IPv6 settings values.
Network interface settings values.
iPF830
IPv6 settings values.
User's Guide