iPF830
g
Paper Feed Slot
When loading a roll, insert the edge of the roll paper here.
Holder Stopper
h
Secure rolls on the Roll Holder with this part.
i
Ink Tank Cover
Open this cover to replace an Ink Tank. (See "Ink Tank Cover (Inside).")
Control Panel
j
Use this panel to operate the printer and check the printer status. (See "Control Panel.")
Release Lever
k
Releases the Paper Retainer. Lift this lever toward the front of the printer when loading paper.
Maintenance Cartridge
l
Ink used for maintenance purposes such as head cleaning is absorbed. (Replace the cartridge when it is full.)
Carrying Handles
m
When carrying the printer, have six people hold it by these handles under both sides.
Maintenance Cartridge Cover
n
Open this cover to replace the Maintenance Cartridge.
Stand
o
A stand that holds the printer. Equipped with casters to facilitate moving it.
p
Stand L
The left leg of the Stand.
Stand R
q
The right leg of the Stand.
r
Top Stand Stay
Supports Stand L and Stand R. Attach the optional Media Take-up Unit to this part.
Leg Covers
s
Covers for Stand L and Stand R.
Stopper
t
Locks the Stand casters.
Always release the Stopper before moving the printer. Moving the printer while the Stopper is locked may
scratch the casters or the floor.
User's Guide
P.466
➔
P.422
➔
Front
463