Canon imagePROGRAF iPF830 User Manual page 586

Replacing the Maintenance Cartridge
Confirm the message
When the Maintenance Cartridge is almost empty, a message is shown on the Display Screen. According to the
message, replace the Maintenance Cartridge or prepare a new Maintenance Cartridge. (See "When to Replace
the Maintenance Cartridge.")
If a message is displayed requesting Maintenance Cartridge replacement, you can skip the step Access the menu
for Maintenance Cartridge replacement. Follow the instructions in Replace the Maintenance Cartridge.
Access the menu for Maintenance Cartridge replacement
1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to
select the Settings/Adj. tab (
Note
2
Press the OK button.
The Set./Adj. Menu is displayed.
3
Press ▲ or ▼ to select Maintenance, and then press the OK button.
4
Press ▲ or ▼ to select Repl. maint cart, and then press the OK button.
Instructions are displayed on the Display Screen.
586
P.590
➔
Maintenance
cartridge full.
).
•
If the Tab Selection screen is not displayed, press the Menu button.
Replace the
MaintCart,
keeping it level.
iPF830
User's Guide