Stowing The Stationary Output Stacker - Canon imagePROGRAF iPF830 User Manual

Large format printer
Hide thumbs Also See for imagePROGRAF iPF830:
Table of Contents

Advertisement

Stowing the Stationary Output Stacker

When storing printed documents on the Output Stacker, always use it in position (1). If you do not, printed docu-
ments may not be dropped into the Output Stacker, and the printed surface may become soiled.
Important
The Output Stacker can accommodate one sheet. When printing multiple pages, remove each sheet after it is
printed.
Before using the Output Stacker, remove the Rewind Spool. If you do not, it may prevent printed documents from
being held correctly, and they may be scratched.
The Output Stacker can hold printed documents from rolls that are 62 inches (1,575 mm) long. When printing
longer documents, use the optional Media Take-up Unit.
The Output Stacker locks into position if you lift it to position (1) or (2). To lower the Output Stacker, lift the front
Basket Rod lightly to release the lock, and then lower the stacker.
Stowing the Stationary Output Stacker
Stowing the Stationary Output Stacker
Stow the Stationary Output Stacker if you will use the Media Take-up Unit or if you will not use the Stationary Out-
put Stacker for an extended period.
1
When the Output Stacker is in the position used when storing
printed documents (a), lift the front Basket Rod gently to re-
lease the lock, lower the stacker toward the front (b), and push
it all the way back.
360
a
b
iPF830
User's Guide

Advertisement

Table of Contents
loading

Table of Contents