Removing Printed Documents From The Media Take-Up Unit (Optional) - Canon imagePROGRAF iPF830 User Manual

Removing Printed Documents from the Media Take-up Unit (Optional)

The media take-up unit is now ready for use. Printed rolls can now be rewound automatically.
Important
Note

Removing Printed Documents from the Media Take-up Unit (Optional)

Removing Printed Documents from the Media Take-up Unit (Optional)
1
Press the Feed button.
2
Hold down the ▼ button to advance the roll a little.
To protect the paper that has been rewound, advance it an
amount longer than the outer circumference.
3
Remove the Weight Roll from the roll paper.
372
•
Always set the Weight Roll on the paper. Failure to do this may cause rewinding problems.
•
When setting the Weight Roll on the paper, avoid touching the paper core and causing the wound roll to
become misaligned on the left and right end. If it is misaligned on the left and right ends, a rewinding
problem may result.
When the media take-up unit is in use, an icon indicating the
•
take-up mode is shown on the Display Screen.
iPF830
User's Guide