Canon imagePROGRAF iPF830 User Manual page 440

Menu Structure
First Level
Take-up
Reel( *12 )
Prep.Move-
Printer
Admin.
Menu( *8 )
Adj. Fine Feed( *15 )( *16 )
Printer In-
fo( *15 )
*1:Available after you have used Standard or Initial adjustmt in Head Posi. Adj. once.
*2:Available if Adj. Priority is Automatic or Print Quality.
*3:Available if Adj. Priority is Automatic or Print Length.
*4:Available only if Use Nesting is On.
*5:Not displayed if IPv4 Mode is Manual.
*6:Not displayed if Auto Detect is On.
*7:Follows the setting in Date Format.
*8:Restrictions apply if a password is configured using Change Password in the Admin. Menu.
440
Viewing and configuration is possible for administrators, and only viewing for other users.
*9:Restrictions apply if a password is configured using Change Password in the Admin. Menu.
Viewing and configuration is possible for administrators only.
*10:Not displayed if IPv6 Support is Off.
*11:Default setting for the time to enter the power save mode/Sleep mode is recommended.
*12:Displayed only when the Media Take-up Unit is attached.
Second Level Third Level
CarriageS- Automatic* | Fixed
canWdth
Use On* | Off
USB( *8 )
Use Ether- On* | Off
net( *8 )
Use Remo- On* | Off
teUI( *8 )
Reset PaprSetngs( *8 )
High Speed( *8 ) | Secure High Spd.( *8 ) | Secure( *8 )
Erase HDD
Data
Output Print* | Print (Auto Del) | Save: Box XX
Method
Print After Off* | On
Recv
Common Print* | Print (Auto Del)
Box Set.
( *5 )( *8 )
Show Job Off | On*
Log( *8 )
Use Take- Disable* | Enable
up Reel
Auto Feed( *13 )
Skip Take- Off* | On
Up Err( *14 )
Level 1 | Level 2 | Level 3
Change (The screen for setting the password is displayed)
Pass-
word( *9 )
Init.Admin.Pswd( *9 )
Paper Info
Ink Info
Head Info
System Info
Error Log
Use Situa- Tot.Print Area | Duty Counter
tion
Fourth Level Fifth Level Sixth Level Seventh Level
iPF830
Eighth Level
User's Guide