iPF830
9
Press the Feed button.
Roll paper is fed to the specified cut position and then auto-
matically stopped.
10
Cut the roll paper manually with scissors or the like.
11
Press the OK button.
After the roll is rewound, it stops automatically.
Manual (for paper of which the leading edge rubs the printhead)
Manual
Select Manual
•
Once the following step has been performed, the procedure can be started from step 10 the next time.
Note
•
Printing the second and subsequent times
•
Printing after replacing with the same type of paper
1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to
select the Paper tab (
•
If the Tab Selection screen is not displayed, press the Menu button.
Note
User's Guide
Print
Feed paper to the cut
position by pressing the
Feed button and cut
manually
).
Specifying the Cutting Method for Rolls
Rewind paper by pressing
the OK button
347