Canon imagePROGRAF iPF830 User Manual page 373

iPF830
4
Press the Cut button.
5
Press ▲ or ▼ to select Yes. As you hold the trailing edge of the printed document, press the OK button.
The roll is now cut.
•
Always hold the trailing edge of printed documents when cutting rolls. If you do not hold the documents,
they may fall on the floor and the printed surface may become soiled.
Important
6
Hold the trailing edge of the printed document and press
the ▼ button on the Media Take-up Unit to rewind the prin-
ted document.
Apply adhesive tape to the rewound paper to hold it in
place, if necessary.
•
Be careful not to scratch the printed surface.
Important
7
Turn off the Media Take-up Unit by pushing in the Rewind
Mode Switch.
User's Guide
Removing Printed Documents from the Media Take-up Unit (Optional)
373