Canon imagePROGRAF iPF830 User Manual page 423

iPF830
• ▼ button
Press this button in the menu to move to another item.
In menu items requiring numerical input, press this button to decrement the number.
OK button
f
Press this button on the Tab Selection screen to display the menu of the tab shown.
Pressing this button in menu items of each tab for which
the menu item, enabling you to execute menu commands or set menu values.
Also press this button if the Display Screen indicates to press the OK button.
Stop button
g
Cancels print jobs in progress and ends the ink drying period.
Power button (green)
h
Turns the printer on and off. (See "Turning the Printer On and Off.")
The Power button is lit when the printer is on or in Sleep mode.
Navigate button
i
Enables you to check instructions for loading and removing paper or replacing ink tanks or printheads, as well
as other operations. (See "How to View Instructions With Navigate.")
Back button
j
Displays the screen before the current screen.
Cut button
k
Pressing this button when rolls are loaded cuts the paper, if you have specified Automatic or Eject in Cutting
Mode in the Control Panel menu. (See "Specifying the Cutting Method for Rolls.")
Feed button
l
Pressing this button when rolls are loaded enables you to reposition the paper. (See "Feeding Roll Paper
Manually.")
P.341
➔
Load button
m
Press this button when loading or replacing paper.
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Printer.")
n Roll Media lamp (green)
Lit when rolls are selected as the paper source.
Cut Sheet lamp (green)
o
Lit when sheets are selected as the paper source.
•
In Sleep mode, any button can be pressed except the Power button to recover from Sleep mode.
Note
User's Guide
is displayed at left will move to the lower level of
P.333
➔
P.353
➔
P.17
➔
P.428
➔
P.344
➔
Control Panel
423