Additional Settings Pane - Canon imagePROGRAF iPF830 User Manual

Large format printer

Hide thumbs Also See for imagePROGRAF iPF830:

Table of Contents

Additional Settings Pane

Enlarged/Reduced Printing

Select this checkbox to choose the following options.

Resizing Originals to Fit the Roll Width

Resizing Originals by Entering a Scaling Value

Fit Roll Paper Width

Resizes the document image to match the roll width.

Resizes the document image based on a specified scaling value. Enter a value in a range of 5–600.

Borderless Printing

Borderless printing is available if roll paper is selected in the

Activate this setting for borderless printing to match the size and width of the paper.

Borderless Printing by Resizing Originals to Fit the Roll Width

Borderless Printing at Actual Size

Print Centered

Select this checkbox to print document images in the center of the paper.

Printing Originals Centered on Rolls

Printing Originals Centered on Sheets

No Spaces at Top or Bottom

Select this checkbox to print the next image skipping blank areas above and below printable data in docu-

ments, which enables you to conserve the paper.

Conserving Roll Paper by Printing Originals Without Top and Bottom Margins

Rotate Page 90 degrees

Select this checkbox to rotate the document image by 90 degrees before printing.

Conserving Roll Paper by Rotating Originals 90 Degrees

Select this checkbox to start imagePROGRAF Free Layout before printing.

This allows you to print multiple documents next to each other.

Printing Multiple Originals Next to Each Other

The following settings are available on the Additional Settings pane.

You can configure the method for saving print jobs to the printer hard disk.

When Print Preview is selected on the Main panel, Print Preview is disabled.

Paper Source list.

User's Guide