Table of Contents
Advertisement
Resizing Originals by Entering a Scaling Value (Mac OS)
8
Select the width of the loaded roll in the
(420.0mm).
9
A
In the
Page Size list, click the size of the original as specified in the application. In this case, click ISO
A4.
10
Select the
11
Click ISO A4 in the
12
F
Click
Scaling and enter 120.
Note
13
Confirm the print settings and print as desired.
Note
Resizing Originals by Entering a Scaling Value (Mac OS)
Resizing Originals by Entering a Scaling Value (Mac OS)
This topic describes how to enlarge originals before printing by entering a scaling value, based on the following
example.
•
Document: Any Type
•
Page size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in])
•
Paper: Roll paper
•
Paper type: Plain Paper
Roll paper width: A2/A3 roll (420.0 mm [16.5 in])
•
1
Choose Page Setup from the application menu to
display the Page Attributes dialog box.
68
C
Enlarged/Reduced Printing check box.
G
Paper Size list.
•
You can specify enlargement that exceeds the paper size, but in this case, the portions off the bottom and
right edges of the paper will not be printed.
•
If the original size after enlargement or reduction is
smaller than the paper size, the original is printed in
the upper-left corner. In this case, you can center
E
originals by selecting
Print Centered on the Lay-
out sheet.
•
For tips on confirming print settings, see "Confirming Print Settings ."
M
Roll Paper Width list—in this case, ISO A2/A3 Roll
P.149
➔
User's Guide
iPF830
Advertisement
Table of Contents
Troubleshooting
