Canon imagePROGRAF iPF830 User Manual page 448

Menu Settings
GL2 Paper
Settings Manag-
er
Line &
Pen
Manag-
er
448
Setting Item
Standard cut
Nesting Use Nesting
Nesting WaitTime
Cut Lines
Enable merge
Pen Set- Select Palette
up
Define Palette
Reset Palette
Smoothing
Description, Instructions
Automatically selects the best standard paper size from
the width of the loaded roll paper and the image size and
cuts the roll paper.
Selecting On will store print jobs until multiple documents
can be arranged to fill up the roll width, instead of printing
each print job as it is received.
Specify a time to wait until printing, as desired.
Select On to print cut lines between each document on
the roll.
Specify whether to merge or print over colors where lines
overlap.
Choose Off to print the second line over the first. Choose
On to merge all overlapping colors.
As pen values, choose Software, Palette A, Palette B, or
Factory.
Choose Software to print according to software settings.
Choose Palette A or Palette B to print using the value
specified in Define Palette.
Specify the Width, Color, and Line Attributes in the pa-
lette Pen no.. Choose Factory to confirm the values
when Factory is selected in Select Palette.
In Line Attributes, choose No Setting or Circle Setting
as the processing for the ends and junctions of lines.
•
If you choose No Setting
•
If you choose Circle Setting
Restore Define Palette to the default palette settings.
Choose whether to print arcs as smooth curved lines or as
multiple connected line segments.
•
If you choose Software
Operation is determined by the application. If nothing
is specified by the application, the result is as shown in
the figure.
Note: By default, this is a 72-sided figure
iPF830
User's Guide