Canon imagePROGRAF iPF830 User Manual page 450

Menu Settings
Inter- TCP/IP
face
Setup
Ether-
net
Driver
Interface Print
Return Defaults
System Sleep Timer
Setup
Shut Down Timer
Buzzer
Contrast Adj.
Date &
Time
Date Format
Language
Time Zone
Length Unit
450
Detect Mismatch
Setting Item
IPv4 DNS
DNS Host Name
Settings
DNS Domain Name
IPv6 IPv6 Support
IPv6 StlessAddrs
DHCPv6
DNS DNS
Settings Dync
update
Pri. DNS SrvAddr
Sec. DNS SrvAddr
DNS Host Name
DNS Domain Name
Auto Detect
Comm.Mode
Ethernet Type
Spanning Tree
MAC Address
Date
Time
Description, Instructions
Specify the DNS host name.
Specify the DNS domain name.
Specify whether to connect via IPv6.
Specify whether a IPv6 stateless address is used.
Specify whether DHCPv6 settings are used.
Statefull Specify whether DNS server registration is updated auto-
Addr matically.
State-
less
Addr
Specify the DNS server address.
Specify the DNS host name.
Specify the DNS domain name.
Specify the communication method. To apply your
changes, choose Register Setting.
Choose On for automatic configuration of the LAN com-
munication protocol. Choose Off to use settings values of
Comm.Mode and Ethernet Type.
Choose the LAN communication method.
Choose the LAN transfer rate.
Choose whether spanning-tree packets are supported
over the LAN.
Indicates the MAC address.
Print interface settings information.
Choose OK to restore Interface Setup settings to the de-
fault values.
Specify the period before the printer enters sleep mode.
Sets the time until the printer turns off automatically. If no
operations are performed on the printer for the duration of
the time set in Shut Down Timer after entering Sleep
mode, the printer automatically turns off.
Choose On for the buzzer to sound once for warnings and
three times for errors.
Adjust the Display Screen contrast level.
Set the current date.
Set the current time. Available only if the Date setting is
specified.
Specify the date format.
Specify the language used on the Display Screen.
Specify the time zone. Time zone options indicate a main
city in this time zone and the difference from Greenwich
Mean Time.
Choose the display unit for length. Change the unit dis-
played for the remaining amount of roll paper, Tot.Print
Area, and so on.
Specify printing behavior if the type and size of paper
specified in the printer menu does not match the type and
size in the printer driver.
iPF830
User's Guide