Canon imagePROGRAF iPF830 User Manual page 348

Specifying the Cutting Method for Rolls
2
Press the OK button. The Paper Menu is displayed.
3
Press ▲ or ▼ to select Paper Details, and then press the OK button.
4
Press ▲ or ▼ to select the type of paper, and then press the OK button.
5
Press ▲ or ▼ to select Cutting Mode, and then press the OK button.
6
Press ▲ or ▼ to select Manual, and then press the OK button.
7
When "Perform the detection of paper leading edge?" is displayed, select Do not perform.
Note
8
Press the Feed button.
9
Press ▲ or ▼ to align the paper leading edge with
the (a) position.
10
Print the job.
The printer stops advancing the paper after printing.
Note
11
Press the Feed button.
Roll paper is fed to the specified cut position and then auto-
matically stopped.
348
•
If you set the detection of paper leading edge to Do not perform, a margin of about 10 cm is created at
the paper leading edge when printing starts.
•
When the detection of paper leading edge is set to Do not perform, printing will start at the position at
which the roll was set for the first printing after replacing a roll. Thus, the margin of the paper leading edge
will enlarge.
(See "Loading Rolls in the Printer.")
•
The printer can continue to receive print jobs from computers. If a print job is received and printed here, it
can be printed without the margin of about 10 cm being created at the paper leading edge.
P.333
➔
iPF830
User's Guide