Roll Media Option Specifications - Oce Arizona 200 GT User Manual

Roll Media Option Specifications

Introduction
The Roll Media Option available for the Océ Arizona 200/250/300/350 GT printer allows
the use of various flexible media that are supplied on a roll. Specifications such as print
speed, print area available and the amount of waste associated with the use of roll media
are indicated in this section.
Note:
The Océ Arizona 200/250/300/350 GT and the Roll Media Option must be operated
in accordance with the environmental conditions specified in the Océ Arizona
200/250/300/350 GT Site Preparation Guide and all safety requirements noted in this
document.
RMO Print Speeds
For printers with software/firmware greater than version 2.6, RMO print speeds are ap-
proximately as shown in this table (based on a 2190mm x 3000mm image).
#
RMO Print Mode
Production
Quality
Quality Matte
Quality Density
Fine Art
Quality 2 Layer
(White Ink Op-
tion)
Quality 3 Layer
(White ink option)
Media Size Supported
Width (Max.): 2.2m (86.6")
Width (Min.): 0.9mm (36")
Roll Diameter (Max.): 240mm (9.45")
Core Inner Diameter: 76.2mm (3")
Print Size Supported
2.190m (86.2")
Arizona 350 GT
m²/hr. / f²/hr.
17.5 / 188
12.0 / 129
8.6 / 93
6.7 / 72
9.7 / 105
6.0 / 65
4.0 / 43
Chapter 7 - How to Operate the Roll Media Option
Roll Media Option Specifications
Arizona 250 GT
m²/hr. / f²/hr.
13.1 / 141
9.4 / 101
6.6 / 71
5.0 / 54
7.3 / 78
N/A
N/A
Arizona 200 GT
m²/hr. / f²/hr.
7.3 / 78
5.1 / 55
N/A
N/A
3.9 / 42
N/A
N/A
131