Table of Contents
Advertisement
Cancelling Menu [CLR]
・ This key uses with menu functions.
・ When it keeps pressing the key while printing, the printer is canceled printing.
Printing [PRINT]
・ This key uses for print or the data output.
・ The printer setting is set on "PRINT MODE" menu.
Stopping Buzzer [ACK]
・ The buzzer sound stops when the key is pressed after the alert generated, and the alert is displayed
on the screen. However, it keeps outputting the relay contact output while phenomenon is continuing.
・ One key pressing deals with one alert generation factor. And, it deals with the generation of all alert
factor under pressing about three seconds.
Up and Down Key Cursor [CURSOR]
When it is a standard mode
・ When the
when keeping pressing it.
・ When the
when keeping pressing.
・ Depth at the cursor position is displayed on the depth cursor.
・ The cursor display is set by "CURSOR" menu.
・ The depth of the depth cursor doesn't display below the decimal point at 100m or more.
・ The depth cursor disappears when the range is switched, and the depth cursor exceeds the display
range. However, when either key is pressed, the depth cursor is displayed the under the depth scale
again.
When it is a history mode
・ Whenever the
6hr→12hr→24hr)
・ Whenever the
12hr→6hr→3hr)
When menu is displayed
・ When the
・ When the
4. Operation 14
key is pressed, the depth cursor is moved to shallow one and it moves accelerating
key is pressed, the depth cursor is moved to the deep end and it moves accelerating
key is pressed, the drawing time of the history is lengthened. (four stages of 3hr→
key is pressed, the drawing time of the history is shortened. (four stages of 24hr→
key is pressed, the item above the menu is selected or a set value is changed.
key is pressed, the item under the menu is selected or a set value is changed.
(Refer to 4.6 Printer Control Setting.)
(Refer to 4.3 Display Setting.)
Hide quick links:
Advertisement
Table of Contents
