Cables And Wires - Meridian Nortel 1 Option 11C Mini Installation Manual

Chapter 2 — Identifying the Option 11C Mini equipment

Cables and wires

Table 5 lists the Option 11C Mini cable kits and their contents.
Table 5
Option 11C Mini cable kits
Cable or wire
NTDK88 Main cable kit
NTBK48 three-port SDI cable
NTAK1104 AUX cable
A0601396 F-M DCE to DTE
converter
A0601397 F-F DCE to DTE
converter
A037683
NTDK89 Chassis Expander cable kit
NTDK95 CE-MUX/DS-30X bus
cable
NTTK15 cable kit for Australia/New Zealand
A0386023 power cord for
Australia and New Zealand
A0376837
NTTK22 cable kit for Denmark
A0386026 power cord for
Denmark
A0376837
Purpose/description
The NTBK48 connects equipment, such as
TTYs and modems to the Option 11C Mini.
Use the NTBK48 with the NTDK97 MSC
card.
The NTAK1104 connects a PFTU to a
system chassis.
You can use the A0601396 when
connecting SDI ports to equipment, such
as TTYs and modems.
You can use the A0501397 when
connecting SDI ports to equipment such
as TTYs and modems.
Ferrite filter
The NTDK95 connects the Main Chassis
to the Chassis Expander. You need two of
these cables to connect the Main Chassis
and the Chassis Expander.
Length: 2 ft (610 mm)
The A0386023 connects a system chassis
to a 220 V AC commercial power source.
Length: 8 ft (2438 mm)
Ferrite filter
The A0386026 connects a system chassis
to a 220 V AC commercial power source.
Length: 8 ft (2438 mm)
Ferrite filter
Option 11C Mini Planning and Installation Guide
Page 37 of 332