Meridian Nortel 1 Option 11C Mini Installation Manual page 247

Chapter 17 — Connecting the telephones
3 Press the pound key again to select the default extension
number.
You hear the relocation tone. The character display shows "OK".
OR
If the extension number is already in use by another telephone, you
hear the special dial tone. If the telephone has a display it shows
"MULTI-LINE, EXTENSION?".
To accept the default extension number, press the pound key.
To select a new extension number, manually enter an extension
number and press the pound key.
OR
If the extension number is not available for use, the character display
shows "ERROR, EXTENSION?" and you hear overflow tone.
This situation occurs when you select an extension number manually,
or when extension numbers are entered for additional keys. A default
extension number will not be offered if it is not available.
You must repeat step 3 and manually enter a new extension number.
Note 1: If other keys require secondary extension numbers, you are
prompted until you enter all of the required extension numbers for the
model.
Note 2: These extension numbers cannot be defaulted. The text display
that prompts for additional extension numbers is "KEY kk EXT?" where
"kk" represents the key number requiring the extension number.
Note 3: Each prompt for another extension number is accompanied by
special dial tone. When you are programming an extension number, the
lamp associated with that number on the telephone is lit.
4 Hang up the telephone receiver.
After approximately 10 seconds, the telephone is configured.
Note: If you replace the handset before completing the prompt
sequence, the installation will automatically fail. This can be useful if
you make an error and want to restart the procedure.
—————————— End of Procedure ——————————
Option 11C Mini Planning and Installation Guide
Page 247 of 332