Trunk Connections; Nt8D14 Universal Trunk Card - Meridian Nortel 1 Option 11C Mini Installation Manual

Page 256 of 332
21T
21R
P
F 22T
22R
T
23T
23R
5
24T
24R

Trunk connections

NT8D14 Universal trunk card

553-3021-209 Standard 3.00
Chapter 18 — Connecting the trunks
V-BL Connect to the
BL-V telephone
V-O Connect to the
O-V telephone line card
V-G Connect to the central
G-V office trunk
V-BR Connect to the trunk
BR-V line card
The Universal trunk card provides eight analog trunks that can function in the
modes shown in Table 57.
Table 57
NT8D14 Universal trunk — modes and option settings
Modes
Central (CO)
2- way TIE trunk (loop Dial Repeat)
2 - way TIE trunk (Outgoing Incoming
Dial)
Recorded Announcement (RAN)
Paging trunk
Japan CO/DID operation
DID operation
Loop length>2000 ¾
DID operation
Loop length <2000¾
Note: OFF indicates that no strap is present.
J1 and J2 locations apply to all eight trunks.
Refer to Table 58 on page 257 for the connections to the NT8D14 Universal
trunk at the cross-connect terminal.
April 2000
Connect to TN assigned to
the telephone
Connect to TN assigned to
the trunk
Jumper
Location strap
J1, J2
J1, J2
J1, J2
J1, J2
J1, J2
J1, J2
J1, J2
J1, J2
OFF
OFF
OFF
OFF
OFF
OFF
ON
OFF