Table of Contents
Advertisement
Page 40 of 332
Chapter 2 — Identifying the Option 11C Mini equipment
Miscellaneous items for installation
553-3021-209
Standard 3.00
Table 6
Option 11C Mini miscellaneous cables and wires (Continued)
Cable and wire
2
#6 AWG (20 mm
) insulated
ground wire (Europe)
2
#8 AWG (10 mm
) insulated
ground wire (Germany)
Cross-connect wire
Note 1: This cable is available in different versions, depending on local EMC
specifications.
Note 2: These cables are not supported under EMC specifications VL43.140P.
The following is a list of miscellaneous items that you can use as part of
Option 11C Mini system installation. Quantities needed depend on the site
and customer requirements:
•
QUA6 Power Failure Transfer Units (PFTU) to transfer lines during a
power or system failure
•
NTBK80 grounding block
•
modems or Data Communication Equipment (DCE) for remote access to
the system
•
on-site Data Terminating Equipment (DTE) or TTY terminal for
accessing the system
•
connecting blocks for the cross-connect terminal
•
transformers and centralized power supplies for items such as digit
displays on telephones
•
optional equipment such as music sources, RAN machines, paging
equipment, and CDR devices
•
NTAK92 Off-Premise Protection Module for connecting up to four
off-premise analog telephones
April 2000
Purpose / description
The #6 AWG (20 mm
ground wire connects a chassis to a
building ground source.
The #8 AWG (10 mm
chassis to a building ground source.
The cross-connect wire makes cross
connections at the cross-connect
terminal.
2
) insulated
2
) connects a
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Nortel Meridian 1 Option 11C Mini and is the answer not in the manual?
Questions and answers