Creating Digital Model Telephones; Modifying Digital Model Telephones - Meridian Nortel 1 Option 11C Mini Installation Manual

Appendix B – Changing preprogrammed data Page 327 of 332

Creating digital model telephones

To create model digital telephones, you must program key 0 with a function
that can act as a prime extension number or its equivalent. This includes
telephones that are programmed to have Single Call Ringing (SCR), Multiple
Call Ringing (MCR), Single Call Non-Ringing (SCN), Multiple Call
Non-Ringing (MCN), and Automatic Call Distribution (ACD).
For ACD telephones, the model telephone defines the ACD queue. To define
the extension number, you must enter the ID number of the agent or the
Central Answering Position.
You must enter the following information in LD 11 to create a digital
telephone model:
LD 11
REQ NEW
TYPE 2XXX M or 3000 M "XXX" = allowed telephone types
MODL YYY "YYY" = the model number of the telephone that you are
creating (between 1 - 127)
Enter the responses to the remaining prompts to complete the new model.
Refer to the Option 11C Software guides for a complete list of prompts and
possible responses.

Modifying digital model telephones

If you want to modify a digital telephone, load LD 11 and enter the following
commands on the TTY:
LD 11
REQ CHG
TYPE 2XXX M or 3000 M "XXX" = allowed telephone types
MODL YYY "YYY" = the model number of the telephone that you are
modifying
For more information about LD 11, refer to the X11 Administration
Input/Output Guide.
Option 11C Mini Planning and Installation Guide