Meridian Nortel 1 Option 11C Mini Installation Manual page 95

Chapter 6 — Installing the Option 11C Mini
12 Install the Mini System Controller (MSC) card and the 48-port Digital
Line Card.
a Install the Security Device on the NTDK97 MSC card. Install the
MSC card in CPU slot 0 of the Main Chassis. See Procedure 9
"NTDK97 MSC installation" on page 153.
b Install the NTDK16 48-port Digital Line Card in Slot 4 of the Main
Chassis. See Procedure 10 "NTDK16 48-port Digital Line Card
installation" on page 156.
The NTDK16 Digital Line Card is not required for the Option 11C
Mini system to operate.
13 Install the optional circuit cards that you wish to have in your Option 11C
Mini system. Refer to "Optional circuit cards" on page 156 and the ISDN
BRI Administration and Maintenance Guide (553-3011-311). Also, refer
to your card slot assignment plan.
14 Install the cross-connect terminal. See "Chapter 13 — Installing and
connecting the cross-connect terminal" on page 169.
Refer to the following procedures:
— Procedure 19: "Installing the BIX cross-connect terminal" on
page 171
— Procedure 20: "Installing the Reichle Masari cross-connect terminal
(Germany)" on page 172
— Procedure 21: "Installing the Krone Test Jack Frame (UK)" on
page 176
15 Install the cables from the chassis to the cross-connect terminal. See
"Chapter 13 — Installing and connecting the cross-connect terminal" on
page 169. Refer to Procedure 22: "Connecting the cables" on page 179.
— Install the PFTUs, if provided. See "Chapter 14 — Installing Power
Failure Transfer Units" on page 185. Refer to Procedure 23:
"Installing the PFTU" on page 185.
16 Connect the SDI port cable at the back of the chassis. See "Chapter 15 —
Installing and connecting SDI and Ethernet ports" on page 191. Refer to
Procedure 24: "Connecting SDI ports on the MSC card" on page 193.
Option 11C Mini Planning and Installation Guide
Page 95 of 332