Table of Contents
Advertisement
Procedure 5
Installing the Option 11C Mini chassis in a 19 inch rack/cabinet
1
Fasten the left chassis guide bracket to the left rack/cabinet
support. Insert two #12-24 self-tapping screws into the two middle
slots in the chassis guide bracket and into the respective holes in the
left rack/cabinet support. Fasten the screws.
Note: The rack/cabinet brackets help guide the chassis into place,
and allow one person to install the chassis in the rack/cabinet.
2
Fasten the right chassis guide bracket to the right rack/cabinet
support. Insert two #12-24 self-tapping screws into the two middle
slots in the bracket and into the respective holes in the right
rack/cabinet support. Fasten the screws. See Figure 33.
Figure 33
Chassis guide bracket installed in a rack
Chapter 9 — Installing the chassis
Option 11C Mini
Page 131 of 332
Use two self-
tapping screws
in the two
middle slots.
Planning and Installation Guide
Hide quick links:
Advertisement
Table of Contents
