Table of Contents
Advertisement
Chassis grounding instructions
Chapter 11 – Installing the system ground
Procedure 7 describes how to ground the Option 11C Mini Main Chassis and
Chassis Expander. Repeat the steps for each Main Chassis and Chassis
Expander installed in the system.
Procedure 7
Grounding the Option 11C Mini chassis
1
Make sure that you disconnect the AC power cord from the power
outlet.
Note: For rack/cabinet configurations, equipment must be powered
from the same service panel.
Never connect power to a chassis that is not grounded correctly.
2
Install an NTBK80 grounding block near the chassis. See
Figure 37.
Note: Use the grounding block as a bridging point for ground wires
from up to six nearby Option 11C Mini Main Chassis and Chassis
Expander pairs. If you have additional chassis, you require additional
grounding blocks.
WARNING
Option 11C Mini
Planning and Installation Guide
Page 141 of 332
Hide quick links:
Advertisement
Table of Contents
