Table of Contents
Advertisement
Chapter 12 — Installing the circuit cards
This chapter describes how and where to install circuit cards used in the
Option 11C Mini system. This chapter is divided into the following main
sections:
•
"Circuit cards required for the Option 11C Mini" on page 151. This
section describes the installation of the NTDK97 MSC card and the
NTDK16 48-port Digital Line Card. These cards are required for the
Option 11C Mini system. The following procedures describe how to
install the NTDK97 and the NTDK16:
— Procedure 9: "NTDK97 MSC installation" on page 153
— Procedure 10: "NTDK16 48-port Digital Line Card installation" on
page 156
•
"Optional circuit cards" on page 156. This section describes the circuit
cards that are optional to the Option 11C Mini system.
Refer to "Card slot assignments" on page 77 for additional information on
where to place circuit cards.
Option 11C Mini
Planning and Installation Guide
Page 147 of 332
Hide quick links:
Advertisement
Table of Contents
