Page 196 of 332
NTAK02 SDI/DCH card
553-3021-209
Standard 3.00
Chapter 15 — Installing and connecting SDI and Ethernet ports
Only the Main Chassis supports the NTAK02 SDI/DCH card. You can
configure this card to support ports for the following:
•
two SDI and two DCHI
•
one SDI, one DCHI, and two ESDI
•
four ESDI
You can use the NTAK02 ports to access overlay software. Define these ports
in the configuration database as the SDI logical type.
An NTAK19FB 4-port SDI cable is designed for use with the NTAK02
circuit card. However, you can use an NE-A25B 25-pair cable to extend the
connections to the cross-connect terminal. See Tables 39 through 42 for the
connections for each port.
April 2000