Shifting The Numbering Plan To A New Card Slot - Meridian Nortel 1 Option 11C Mini Installation Manual

Shifting the numbering plan to a new card slot

Appendix B – Changing preprogrammed data
The first number in the numbering plan is assigned to slot 1, unit 0. You can
shift the first number in the numbering plan to a different card slot.
The following procedure describes how to shift the first number in the
numbering plan to a specific card slot.
Procedure 46
Shift the first number in the numbering plan to a different card slot
1 Locate the first line card. Subtract 1 from the number of the card slot
that it is in.
2 Multiply this number by 16.
3 Take the first number in the numbering plan and subtract the result
from step 2.
Note: When you enter the value from step 3 in response to the prompt
"FIRST NUMBER (XXXX)?" on the administration telephone menu,
the number shifts to the appropriate slot.
—————————— End of Procedure ——————————
Option 11C Mini Planning and Installation Guide
Page 319 of 332