Meridian Nortel 1 Option 11C Mini Installation Manual page 132

Page 132 of 332
553-3021-209 Standard 3.00
Chapter 9 — Installing the chassis
3 Attach the left ear bracket (marked with an "L") to the holes on the
left side of the chassis (near the front).
Use two #8-32 machine screws. Position the ear bracket so that the
four holes on the bracket flange are nearer to the back of the chassis.
To determine the front of the bracket, locate the "L". This "L" must be
at the top of the bracket and must face to the front of the chassis.
4 Attach the right ear bracket (marked with an "R") to the holes on
the right side of the chassis.
Use two #8-32 machine screws. Position the ear bracket so that the
four holes on the bracket flange are nearer to the back of the chassis.
To determine the front of the bracket, locate the "R". This "R" must be
at the top of the bracket and must face to the front of the chassis. See
Figure 34.
Figure 34
Right ear bracket installed on the chassis
Bracket flange marked
with an "R". Attach this
ear bracket to the right-
hand side of the
chassis.
5 Place the chassis on the chassis guide brackets.
Carefully slide the chassis into the rack/cabinet until the ear brackets
come to rest against the rack/cabinet support.
April 2000
Attach the
ear bracket to
these holes.