Creating Analog Telephone Models; Modifying Analog Model Telephones - Meridian Nortel 1 Option 11C Mini Installation Manual

Page 326 of 332

Creating analog telephone models

Modifying analog model telephones

553-3021-209 Standard 3.00
Appendix B – Changing preprogrammed data
You must enter the following information in LD 10 to create an analog
(500/2500- type) telephone model:
LD 10
REQ NEW
TYPE 500 M
MODL YYY "YYY" = the model number of the
Enter responses to the remaining prompts to complete the new model. (Refer
to the Option 11 Software guides for a complete list of prompts and possible
responses).
If you want to modify an analog telephone, use LD 10 and enter the following
commands on the TTY:
LD 10
REQ CHG
TYPE 500 M
MODL YYY "YYY" = the model number of the telephone that you are
modifying
For more information about LD 10, refer to the X11 Administration
Input/Output Guide.
April 2000
telephone that you are creating